DN12 Solar tube fittings
£17.02 (Exc. VAT) - £20.42 - Inc. Vat
DN12 Solar tube fittings with parts to service or overhaul solar hot water systems. Service kit to seals that may be leaking. With any sealed system, pipework pressure must be set at a pre determined level to make the solar hot water system work correctly. Each of these flexible solar tube kits contain the following parts:
2 x DN12 male/male flat faced threaded nipples | 4 x DN12 female threaded flat faced nuts | 4 x DN12 fiber washers | 4 x DN12 C clips.
To purchase, enter an amount in the drop down cart below
Description
DN12 Solar tube fittings pack
Used to connect two flexible solar thermal stainless steel tube sections together.
Kits of DN12 solar tube fittings contain the following items. Flat faced nuts – male brass nipple – C clips – Fiber Washers.
AVAILABLE IN DN16 SOLAR TUBE FITTING PACKS
Click onto any of the pictures below to select items required when you service a solar thermal hot water installation system.
DN12 stainless steel tube solar connection set
DN12 flat faced solar hot water system barrel nipple
DN12 back nut fiber washer and circlip set
DN12 C clip back nut securing nut circlip
DN12 self sealing fiber washer
DN12 x 3/4″ BSP solar pump station connector
DN16 stainless steel tube solar connection set
DN16 back nut fiber washer and circlip set
DN16 C clip back nut securing nut circlip
DN16 self sealing fiber washer
DN16 x 3/4″ BSP solar pump station connector
DN16 flat face 22mm connection adaptor
15mm straight solar compression fitting x 1/2″ BSP male
22mm straight solar compression fitting x 3/4″ BSP male
Copper tube DZR compression connector 15mm or 22mm
Copper tube DZR compression 90° elbow