Solar heating fluid Tyfocor ready mixed
The important glycol Antifreeze based heat transfer fluid provides your hot water thermal heating system with the ability to move ambient outside temperatures from the collectors on roof through the pump station into a storage cylinder.
This solar heating fluid is available in 10ltr containers ready mixed Tyfocor to commission your system.
The chemical nature of Glycol contains Ethylene; therefore the product should never come into contact with potable water. The system loop should always go into a secondary separate heating coil.
All users should refer to the COSH data sheets
Click onto any of the pictures below to select items required when you service a solar thermal hot water installation system.
DN12 stainless steel tube solar connection set
DN12 flat faced solar hot water system barrel nipple
DN12 back nut fiber washer and circlip set
DN12 C clip back nut securing nut circlip
DN12 self sealing fiber washer
DN12 solar tube back nut
DN12 x 3/4″ BSP solar pump station connector
DN16 stainless steel tube solar connection set
DN16 back nut fiber washer and circlip set
DN16 C clip back nut securing nut circlip
DN16 self sealing fiber washer
DN16 solar tube back nut
DN16 x 3/4″ BSP solar pump station connector
DN16 flat face 22mm connection adaptor
15mm straight solar compression fitting x 1/2″ BSP male
22mm straight solar compression fitting x 3/4″ BSP male
Copper tube DZR compression connector 15mm or 22mm
Copper tube DZR compression 90° elbow
Ready mixed solar heating system replacement fluid
Flexible solar tube support bracket set