Used with copper tube, these 15mm and 22mm compression fittings are DZR high temperature bronze. This makes sure that they match the high temperatures that solar fluids reach in a sealed thermal system.
We also offer inserts for copper tube to stop any distortion when temperatures can rise to over 180 degrees. Make sure your solar hot water heating system is connected with high temperature compression joints. This will stop future leaks and maintenance cost to repair.
15mm compression insert / 22mm compression insert
Click onto any of the pictures below to select items required when you service a solar thermal hot water installation system.
DN12 stainless steel tube solar connection set
DN12 flat faced solar hot water system barrel nipple
DN12 back nut fiber washer and circlip set
DN12 C clip back nut securing nut circlip
DN12 self sealing fiber washer
DN12 solar tube back nut
DN12 x 3/4″ BSP solar pump station connector
DN16 stainless steel tube solar connection set
DN16 back nut fiber washer and circlip set
DN16 C clip back nut securing nut circlip
DN16 self sealing fiber washer
DN16 solar tube back nut
DN16 x 3/4″ BSP solar pump station connector
DN16 flat face 22mm connection adaptor
15mm straight solar compression fitting x 1/2″ BSP male
22mm straight solar compression fitting x 3/4″ BSP male
Copper tube DZR compression connector 15mm or 22mm
Copper tube DZR compression 90° elbow
Ready mixed solar heating system replacement fluid
Flexible solar tube support bracket set