These flexible pipe work solar tube brackets holds the 2 in 2, one piece flexible solar
thermal tube securely in place. Available in DN12 or DN16 tube sizes.
These are suited to all of the sizes of insulated tubes, by mounting the pipe work securely will ensure safe permanent fixture to wall structures will prevent future leaks. Brackets measure 3 inches long by 2 inches high. They have an M8 fixing into back plate with long screw fixing that wall mounts into brickwork with large raw plug included in kit.
These are sold in packs of 4, as individual wall fixings-brackets-clamp-clips.
Click onto any of the pictures below to select items required when you service a solar thermal hot water installation system.
DN12 stainless steel tube solar connection set
DN12 flat faced solar hot water system barrel nipple
DN12 back nut fiber washer and circlip set
DN12 C clip back nut securing nut circlip
DN12 self sealing fiber washer
DN12 solar tube back nut
DN12 x 3/4″ BSP solar pump station connector
DN16 stainless steel tube solar connection set
DN16 back nut fiber washer and circlip set
DN16 C clip back nut securing nut circlip
DN16 self sealing fiber washer
DN16 solar tube back nut
DN16 x 3/4″ BSP solar pump station connector
DN16 flat face 22mm connection adaptor
15mm straight solar compression fitting x 1/2″ BSP male
22mm straight solar compression fitting x 3/4″ BSP male
Copper tube DZR compression connector 15mm or 22mm
Copper tube DZR compression 90° elbow
Ready mixed solar heating system replacement fluid
Flexible solar tube support bracket set